For Digital Pocket Memo LFH96xx
Firmware v1.10(b001)
technical released 2009-04-03
Previous
v1.06(b001) technical released 2008-08-25
PRIOR TO UPDATE:
In case
you upgrade from v1.00(b002)
and have activated the
“Protect device”
configuration by means of the SpeechExec software, make
sure to disable the
“Protect
device” configuration checkbox before you start the upgrade.
HINT:
PC can't
boot if DPM is connected and the first device in the boot sequence is a USB
device.
NEW FUNCTIONS:
-
Jump back
For faster review of the last words a short tap on
the 4-position switch will generate a four (4) seconds jump back. Only applicable for Digital Pocket Memo 9620 with Philips or
Philips classic 4-position switch configuration.
-
Increased time for Power Saving Mode
For faster operation the device switches into power
saving mode after 60 minutes
instead of four (4) minutes.
SOLVED PROBLEMS:
- Audible noise with external speaker
In the
rare occasion when external speakers where connected to the Digital
Pocket
Memo an audible click noise could be heard when switching the device from
play to
stop mode.
-
Reduction of USB microphone gain
The microphone gain has been reduced for better
compatibility with
Dragon Naturally Speaking®. This gain
reduction is only effective when the
device is used as a USB microphone.
- Recording problem with some SD cards
Slow
Secure Digital (SD) memory cards caused timing problems when using Quality
Play
(QP) recording mode together with the on board encryption function.
Recording
stopped.
- File sequence
Using
long file names together with a barcode module caused a change of the file
sequence
in some occasions.
- Double file name
In some
occasions when using long file names and application of the delete file
function
could generate two file pointers for the same entry. The same dictation
appeared
twice.